Chief Delphi - Large CIM motor pulley size/series?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Large CIM motor pulley size/series? (http://www.chiefdelphi.com/forums/showthread.php?t=51195)

Tim Skloss

07-01-2007 22:27

Large CIM motor pulley size/series?

Does anyone know the EXACT series and size pulley that is on the large CIM motor? Last year someone posted that the motor came with a pulley sized for a GT PowerGrip belt with a 3 mm pitch and 15 mm width.

I would like to use the motor as designed to drive a timing/synchronous belt and use the tensioner as well.

Thanks in advance.

Kevin Sevcik

07-01-2007 23:36

Re: Large CIM motor pulley size/series?

From last year: this post

eshteyn

08-01-2007 10:12

Re: Large CIM motor pulley size/series?

my suggestion would be to buy the appropriate gear for the motor and switch gears.

DonRotolo

09-01-2007 22:36

Re: Large CIM motor pulley size/series?

Motion Control Industries distributes the GT Powergrip belts & accessories.

All times are GMT -5. The time now is 13:24.