Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   Problem with program uploading (http://www.chiefdelphi.com/forums/showthread.php?t=51252)

1573 08-01-2007 12:28

Problem with program uploading
 
i cant upload program with easyCPRO i checked out the cable and tried on other computers but it still dont works can some one help me???

TEAM1949 08-01-2007 12:51

Re: Problem with program uploading
 
did you press the programe button?

jesusfreakmths 08-01-2007 13:09

Re: Problem with program uploading
 
Do you guys know were I can find the code for the camra. Or any info on how to use it, and see code that can give us an idea on how to include it in the code/recive info from it?

1573 08-01-2007 15:23

Re: Problem with program uploading
 
yes i did and the state of the led is always orange (meen i can upload) but it there still an error check out the program state or the cable but every thing is connected.

Davx 08-01-2007 15:26

Re: Problem with program uploading
 
jesusfreakmths: Check out http://kevin.org/frc for some camera implementation code.

1573: In order to program your robot you will need to press and hold the PROG button on your RC, until two orange LEDs are illuminated. Once this is so, send the code with your laptop, but make sure that you have the correct serial port specified. If you are using a USB-To-Serial adapter, you may need to check which COM port it's mapped to. (Control Panel > System > Hardware > Device Manager > Ports (COM & LPT)).

If you're not sure if your adapter is working or not, connect the serial to the program port, open the IFI loader terminal (make sure the window title says that you're connected properly) and hit the reset button on the RC. You should see an init. string. If not, the problem is in your adapter.

1573 08-01-2007 15:40

Re: Problem with program uploading
 
no, the problem it all that i cant connect to the RC 2 leds are orange and in the program state but there still an error... and i chacked out the computer and tried on other but there the same problem

Kingofl337 08-01-2007 15:46

Re: Problem with program uploading
 
Try turning off "verify and download" in the loader setup.
Also make sure you have the correct device selected as easyC can program 04/05 & 06/07 & VEX

Demo Camera Code: http://www.intelitekdownloads.com/easyCPRO/

1573 08-01-2007 15:50

Re: Problem with program uploading
 
nope still don't works the download setting is on frc 2006/2007 controler

intelitek_Chris 08-01-2007 17:45

Re: Problem with program uploading
 
easyC does not automatically detect (and can't possibly know) what port you want to use to download. You probably have the wrong COM port selected. Go to the 'loader setup' and try selecting another one of the available ports until you find the right one. If you are using a USB adapter, each time you unplug the cable and insert it again, there is a chance your COM port number will change.

If this doesn't help, try another loader. You can grab the hex file from your project folder and use another loader to upload it to the RC as a test.
Good luck,

Chris

1573 09-01-2007 02:59

Re: Problem with program uploading
 
nope, i dont understand what can be the problem i tried 2 controlers 2007 and 2006 controlers and tried in 2 computers with 2 diffrent loaders one from easyC and the other from MPlab but there still the same problem "To enable download, hold the 'PROG' button down until the 'PROGRAM STATE' LED is solid orange. Make sure that power is on and the serial cable is connected" any one can help me with that??

Kingofl337 09-01-2007 07:49

Re: Problem with program uploading
 
What are you using for a serial port? USB or Onboard?

Kawashima 09-01-2007 08:19

Re: Problem with program uploading
 
Press and hold the Reset and Prog buttons, until the battery led solid green, and then release reset butoon. After that, release prog buttons.
uploading!!

1573 10-01-2007 02:01

Re: Problem with program uploading
 
im using the com port on my computer not the usb adapter.

darist 10-01-2007 15:13

Re: Problem with program uploading
 
1573,
Can you tell us: what is the error message?
when does the error message occur? (after you press what button?)
What have you selected from the drop-down list of COM ports?
What shows up in the status bar of the window?
Can you post a screenshot of the error?

-- by the way,
Is your "program led" always orange? even before you press the "prog" button?

Good luck!
David A.

1573 11-01-2007 03:12

Re: Problem with program uploading
 
after i press the program state button and the LED is solid orange and i press the donload button. this is the error that i get...
i have tried to do everything but still it doesn't works...:confused: :mad:


All times are GMT -5. The time now is 13:57.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi