Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Ringer pressure (http://www.chiefdelphi.com/forums/showthread.php?t=51687)

Seki 12-01-2007 18:16

Ringer pressure
 
Is there going to be a set pressure on the ringers at the begining of each match?
If so does any ones know?

AV_guy007 12-01-2007 19:03

Re: Ringer pressure
 
i looked for that but could not find it in the rules. however they list the dimensions of the rings at 13' inner ring, 32 inches outer ring and 91/2 inches tall. my guess is they will blow them up so they meet are approximately this size.

Covey41 12-01-2007 19:13

Re: Ringer pressure
 
After Kickoff in Manchester there were people deflating the tubes, I asked them if they knew the details about inflating them. I was told that they just inflated them till they felt full. They also said that the air pumps they used would only inflate them so far, and were not powerfull enough to pop them. No standards just blow them up till they are full.


All times are GMT -5. The time now is 13:14.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi