Chief Delphi - pan/tilt connection for 2007 camera

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - pan/tilt connection for 2007 camera (http://www.chiefdelphi.com/forums/showthread.php?t=51764)

kasemodz

13-01-2007 15:18

pan/tilt connection for 2007 camera

Sry keep changing it, but basically the camera on the workbook is 2006 and the 2007 we are having problems connecting our servo motors. How do we connect the servo motor into the camera?

iBheat

13-01-2007 17:53

Re: pan/tilt connection for 2007 camera

You don't you connect the servos to the RC. If you are using Kevin's code then its PWM01 and PWM02! The servo headers were removed from the Camera board!

Kingofl337

16-01-2007 13:59

Re: pan/tilt connection for 2007 camera

Quote:

Originally Posted by iBheat (Post 555944)

You don't you connect the servos to the RC.

I think you meant: You don't you connect the servos to the camera. :cool:

MattD

16-01-2007 14:15

Re: pan/tilt connection for 2007 camera

Quote:

Originally Posted by iBheat (Post 555944)

You don't you connect the servos to the RC. If you are using Kevin's code then its PWM01 and PWM02! The servo headers were removed from the Camera board!

Quote:

Originally Posted by Kingofl337 (Post 558187)

I think you meant: You don't you connect the servos to the camera. :cool:

iBheat was correct. The servos must be connected to the RC (unless last year's camera is used, though I'm not sure if that is allowed or not).

Ken Streeter

17-01-2007 16:49

Re: pan/tilt connection for 2007 camera

Quote:

Originally Posted by MattD (Post 558206)

...unless last year's camera is used, though I'm not sure if that is allowed or not).

Just FYI, the CMUcam cameras in the 2006 Kit-of-Parts can not be used on a 2007 FRC robot. For more information, see the official Q&A.

iBheat

21-01-2007 14:21

Re: pan/tilt connection for 2007 camera

Quote:

Originally Posted by Kingofl337 (Post 558187)

I think you meant: You don't you connect the servos to the camera. :cool:

Oops, you are right! I guess I was tired :)

All times are GMT -5. The time now is 01:27.