Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: 1565's unoffical lego mock up (http://www.chiefdelphi.com/forums/showthread.php?t=51833)

T3_1565 14-01-2007 13:16

pic: 1565's unoffical lego mock up
 

Mike Starke 14-01-2007 13:58

Re: pic: 1565's unoffical lego mock up
 
From this picture, it looks like your robot will be on an angle...
Doesn't this violate the ramp rule?

I could be wrong...

Ben Piecuch 14-01-2007 14:07

Re: pic: 1565's unoffical lego mock up
 
The robot can be on an angle, as long as the sides of the robot are vertical. It's LEGO, I wouldn't read too much into it. Overall, it looks like a good model. However, with a large, double jointed arm like that, I would check on the 72" envelope limit.

BEN

T3_1565 14-01-2007 14:30

Re: pic: 1565's unoffical lego mock up
 
it reaches up more than it does out. I mean it is lego... It would break the rule if I made it exactly like that, but I'm not limited to where I can connect things, whereas I am with lego lol. and no it isnt on an angle, its just a very low platform.


All times are GMT -5. The time now is 05:17.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi