Activating Autonomous no OI
 

Hi all,
I took home the RC, the camera and all that and everything i need to program the camera.
but i ran into a problem, i can't get the autonomous mode to start. i know it can be done by bridging something at the OI, but since I don't have it with me, i was wondering if there is a way to activate autonomous mode without it, using only the RC.
Thanks,
Carmel

Re: Activating Autonomous no OI
 

without an OI, the RC won't ever execute user code. Your going to need to get one if you hope to do anything

Re: Activating Autonomous no OI
 

OK, thanks
I'll just write anything, and tmw i'll get the OI and work on it
What else do I need to bring back, exept for the OI and the red thether cable, anything?

And after i have everything connected, how do i get the autonomous running?
Thanks,
Carmel

Re: Activating Autonomous no OI
 

You can start autonomous mode by tethering to the robot and setting the team number to 0000, or you can build or buy a competition port dongle with a switch that turns on autonomous. The latter is preferable, because then you'll also have a switch to remotely disable the robot when it starts to flip out.

Re: Activating Autonomous no OI
 

How can I built such thing? any schematics or something like that?

Re: Activating Autonomous no OI
 

You can buy it here. http://andymark.biz/am-0016.html

Info to build one http://www.ifirobotics.com/docs/comp...guide-reva.pdf.