Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)
-   -   What is inner tube depth? (http://www.chiefdelphi.com/forums/showthread.php?t=52106)

Jack Jones 17-01-2007 14:27

What is inner tube depth?
 
I didn't bring one home!

What is the height of a fully inflated pool tube when laying flat on the floor?

That is, I don't think the cross section is circular. If it were, the top of the tube would be 9-1/2" from the floor.

Thanks,
JJ

dlavery 17-01-2007 14:38

Re: What is inner tube depth?
 
When inflated to size, the cross section is approximately circular and the top of the tube is about 9-1/2 inches from the floor (+/- a quarter inch due to variances between individual tubes).

I studied those silly things way too much when making the models for the kick-off animation... :)

-dave

Scion13 17-01-2007 14:58

Re: What is inner tube depth?
 
You have to remember that during the match not all the tubes will be completely inflated. Just a thought.


All times are GMT -5. The time now is 08:00.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi