Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: New Drive System for 703 (http://www.chiefdelphi.com/forums/showthread.php?t=52127)

POLISH703 17-01-2007 18:04

pic: New Drive System for 703
 

Cory 17-01-2007 18:05

Re: pic: New Drive System for 703
 
How much does that weigh?

Joe_Widen 17-01-2007 18:06

Re: pic: New Drive System for 703
 
That is nuts. Can you give us anything about it, how it works. That is somethin else.

Cowmankoza 17-01-2007 18:13

Re: pic: New Drive System for 703
 
very nice, i like the design, im assuming the bottom wheel is offset?, and do i spy geardrive?, my team was contemplating doing something similar, kudos to making it work

mizscience 17-01-2007 18:16

Re: pic: New Drive System for 703
 
Quote:

Originally Posted by Cory (Post 559118)
How much does that weigh?

That's my question as well...

:]

DarkFlame145 17-01-2007 18:16

Re: pic: New Drive System for 703
 
very nice, good work

chris31 17-01-2007 18:16

Re: pic: New Drive System for 703
 
It looks promising, or maybe you have already tested it alot. How much does each wheel weight?

Cody Carey 17-01-2007 18:22

Re: pic: New Drive System for 703
 
And it turns well enough?

cbale2000 17-01-2007 18:34

Re: pic: New Drive System for 703
 
It does weigh quite a bit so far, we're working on ways to bring the weight down (Cheesing the wheels, and gears and such). I couldn't tell you how much each wheel weighs right off hand but they're not too bad.

We haven't hooked up the motors yet but just from pushing it around we find that it seems to work better than our previous tread designs. More grip, it moves more freely and turns on a dime! It's nearly impossible to push sideways (a problem we had with treads) and the gearbox should provide the speed and pushing power we're looking for.

The center wheel does have an offset and yes, it is gear driven, no chains or belts! :D

Tytus Gerrish 17-01-2007 18:36

Re: pic: New Drive System for 703
 
HoLy Canoli ! fourteen wheel drive? idler gears!! Expensive!! who's sponsoring you guys?

cbale2000 17-01-2007 18:37

Re: pic: New Drive System for 703
 
Well Delphi sponsors us thankfully. :)

Po-ser 17-01-2007 19:00

Re: pic: New Drive System for 703
 
:ahh:

I think "Holy moly!!" about sums it up.

Do update and tells us how it drives once you hook it up. Also, once you figure out all of the numbers, could you tell me how much more it would weigh than your tread drive train?

That's really something.

Alex Cormier 17-01-2007 19:13

Re: pic: New Drive System for 703
 
i am very impressed and that does not happen often. One way i have noticed to drastically reduce weight is to go lexan wheels. Get a big block of it and make the wheels, 1126 has been doing that for a few years and the base gets better and better every year.

Reaper40 17-01-2007 19:18

Re: pic: New Drive System for 703
 
Won’t the wheels take more power?

ZeetherKID77 17-01-2007 19:28

Re: pic: New Drive System for 703
 
This is made of win. :D


All times are GMT -5. The time now is 08:40.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi