Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)
-   -   where to order gear tooth board (http://www.chiefdelphi.com/forums/showthread.php?t=52332)

Bruce Meyer 20-01-2007 09:28
where to order gear tooth board
 
I'm looking for the source of the KOP Allegro ATS642LSH board. I didn't see a supplier in any FIRST docs (Sensor Manual, Guidelines&Practices, etc.) and Digikey just lists the acutal gear tooth sensor, not the evaluation board it's so nicely mounted on in the KOP. Any help/suggestions appreciated, thanks!

Mike Betts 20-01-2007 11:36
Re: where to order gear tooth board
 
Quote:
Originally Posted by Bruce Meyer (Post 561034)
I'm looking for the source of the KOP Allegro ATS642LSH board. I didn't see a supplier in any FIRST docs (Sensor Manual, Guidelines&Practices, etc.) and Digikey just lists the acutal gear tooth sensor, not the evaluation board it's so nicely mounted on in the KOP. Any help/suggestions appreciated, thanks!
Bruce,

The GTS board was custom made for FIRST. It was late in arriving (distributed the day before kickoff) and is not on any web site yet.

I would recommend that you call IFI (903.453.0802) and ask about it. If they don't have it they should be able to point you in the right direction.

Alternatively, each team received 2 boards and quite a few teams will not use them. I'm sure that you could trade with another team to get more.

Regards,

Mike

Bruce Meyer 20-01-2007 23:18
Re: where to order gear tooth board
 
Thanks!


All times are GMT -5. The time now is 11:49.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi