pic: Team 1538's Machined Parts (C)
 

Re: pic: Team 1538's Machined Parts (C)
 

Pretty good parts, are you going to make a 8-wheeled robot?

Re: pic: Team 1538's Machined Parts (C)
 

I'm betting on six and spares.

Still....did I catch a whiff of West Coast Drive?

Re: pic: Team 1538's Machined Parts (C)
 

Looks pretty sweet. Billfred or someone else, could you explain what is West Coast Drive? I'ver heard of the West Coast Offense, but never of the Drive.

Thanks.

Re: pic: Team 1538's Machined Parts (C)
 

West Coast Drive, loosely defined, is the small-wheeled, cantilevered setup made famous by 254, 968, 22, 4, 980, and 60 at various points in history.

Re: pic: Team 1538's Machined Parts (C)
 

And such setups by Rage, Gael Force, and the Rhode Warriors are insignificant? :mad: :D

Actually, I don't know very much on when these things were around, my knowledge of robots (other than very, very good ones) effectively starts in '05. Where such setups pioineered by the teams Billfred mentioned before they were adopted by the East Coast?

Nice parts. Poor lathe operator though, must've taken a while to turn down that hex shaft.

Re: pic: Team 1538's Machined Parts (C)
 

I dont get it, why do teams send parts out to be made. My team makes all of our parts (except what we get in the kit and we buy new wheels). It feels great to learn how to fabricate the parts. My teams ain't that big ether, we have maybe 20 to 25 students from 4 schools and like 8 mentors. Sure we work till the last day till 10pm and pull atleast 2 long Saturdays. But we always have a competitive bot.

Re: pic: Team 1538's Machined Parts (C)
 

Some teams do not have facilities to machine their parts and they either have sponsers to machine it for them or pay for them to be machined.

Re: pic: Team 1538's Machined Parts (C)
 

Billfred, perhaps these parts might be for a variation of the West Coast Drive :cool: (Just wait until we post pictures of our finished robot).

As for DarkFlame145's comment. These parts we made by students at two different shops.

More details to follow...

Re: pic: Team 1538's Machined Parts (C)
 

I don't think there is any question about that... Cantilevered wheels, 2 speed dog shifting output shaft powering the center wheels... even the way the pictures are taken are reminiscent of others I have seen.

We're on to you... ;)

Re: pic: Team 1538's Machined Parts (C)
 

More precisely the setup which is commonly known as the "West Coast Drive" was first seen in 2002, used by Team 60.



This was the four wheeled incarnation of the West Coast Drive.

The 6 wheel version debuted in official competition in the 2004 season, in the twins of Team 60 & 254, as well as Team 22.

Re: pic: Team 1538's Machined Parts (C)
 

Team 60 had a cantilevered 4 wheel drivetrain in 2001 as well.

Re: pic: Team 1538's Machined Parts (C)
 

But 60 didn't have the smaller wheels till '02

Re: pic: Team 1538's Machined Parts (C)
 

To me, the "west coast drive" has more to do with slotted wheel mounts/tensioners, cantilevered wheels and chassis mounted gearboxes than wheel size. The chosen wheel size will always depend on the game, while the rest of the drivetrain remains the same. As a west coaster and 10 year veteran, I always give the most credit to Glenn of team 60 as being the 'father' to a lot of the concepts. While many changes have been made in recent history by various teams, he deserves a whole ton of credit for what many teams use today.

Re: pic: Team 1538's Machined Parts (C)
 

If there is a "West Coast Drive" then what is the alternate "East Coast Drive" that must exist?
As for the pictures, it's clear that they are tensioners going through tubing for live shafts, with the drive axles made from steel. Very nice machining that is clearly for a very nice robot. :]