Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Ringer Dimensions (http://www.chiefdelphi.com/forums/showthread.php?t=52442)

dawilliams 21-01-2007 13:24

Ringer Dimensions
 
ARENA Section 6.3 says, "When inflated, each GAME
PIECE is approximately 32 inches across the outer diameter. Each toroid has an inner diameter of
approximately 13 inches, and a height of approximately 9-1/2 inches."

Is anyone else having trouble that the ringers supplied in the KOP don't match the dimensions shown? Ours measure 8.5" height.

Matt H. 21-01-2007 14:18

Re: Ringer Dimensions
 
We had a similar problem until we pumped our tubes up to the maximum PSI. At 2.5 PSI the tubes measure a perfect 9 1/2 by 9 1/2 inches.

We filled the tubes to this pressure using a sensitive pressure gauge and the KOP compressor.


All times are GMT -5. The time now is 13:15.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi