![]() |
pic: Team 1345's 2007 chassis
|
Re: pic: Team 1345's 2007 chassis
Looking good Arefin! Lemme guess, battery will be in the rear? And possible 1/2 robot lift 12".
|
Re: pic: Team 1345's 2007 chassis
I'm calling arm on gearbox-side, ramp on the back.
|
Re: pic: Team 1345's 2007 chassis
seems like it will be a lifting robot not much ground clearance for going up ramps.
|
Re: pic: Team 1345's 2007 chassis
/me is scared
You guys haven't yet seen the pushing power of this beast... want to move the goal? |
Re: pic: Team 1345's 2007 chassis
That's the first chassis that looks close to as overbuilt as ours. :yikes: It's looking pretty good.
|
Re: pic: Team 1345's 2007 chassis
:) Looks good,
What material is the plate on the bottom. David G. |
Re: pic: Team 1345's 2007 chassis
You need to add some structure to resist that square from turning into a diamond. that piece of plastic all the electrical is mounted to isn’t offering any strength to the frame. also. bumpers are a must because there are moving parts exposed on the outside in the "bumper zone" that according to Murphy’s law will get smashed. as well as the front and rear being made of 1/8" thick c-channel offer little resistance to collapse upon impact. it would be a large benefit to add some central strength members to resist against that
|
Re: pic: Team 1345's 2007 chassis
Quote:
|
Re: pic: Team 1345's 2007 chassis
Nice setup. Looks like the top is exactly 4" of the ground. I wonder why?:yikes:
|
Re: pic: Team 1345's 2007 chassis
Quote:
|
Re: pic: Team 1345's 2007 chassis
Quote:
|
Re: pic: Team 1345's 2007 chassis
Questions for the nicest looking chassis and drive train in awhile (I haven't seen Tytus's waterjetted one yet)
|
Re: pic: Team 1345's 2007 chassis
Quote:
|
Re: pic: Team 1345's 2007 chassis
So are the wheels near the battery powered at all? Interesting placement of your gearboxes there. I want to see some video of this in action asap Arefin :)
|
Re: pic: Team 1345's 2007 chassis
Quote:
|
Re: pic: Team 1345's 2007 chassis
Quote:
|
Re: pic: Team 1345's 2007 chassis
Arefin,
it appears you are using that messsy coil of tubing to provide extra air accumulation, a clear rules violation if i ever saw one. i am disappointed in you and may volunteer to be an inspector at one of your regionals just so I can DQ you. ps - please volunteer for the iri so i can make you in charge of cleaning up trash as punishment for poor behavior. :) (cool chassis, anyway) |
Re: pic: Team 1345's 2007 chassis
Alright, I am going to try to answer everyone’s questions…
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
2) Dead axles. 3) There are bearings on the wheels. 4) There is no such thing as “base plate” on this chassis. Electronics are mounted on a 1/16” lexan which is mounted on the crossbars and C channels. Thanks Conor, looking forward to see your robot in action this season. Tytus’s chassis looks great. His chassis looks unstoppable just like it was in 2005, I only hope his driver can drive that thing. Quote:
Quote:
pictures can be decieving. There are no extra tubing in that chassis. It looks that way, because most of the stuff weren't zip tied down well enough. The electrical board needs a lot of work. It will be clean once the whole robot is together. Your inspectors won’t have any trouble inspecting that thing, since we are talking about making our way up to Indiana this summer. Volunteer? Hmm… we shall see. It all depends on if team is going up there or not or if I am taking classes over the summer or not. |
| All times are GMT -5. The time now is 07:10. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi