Chief Delphi
Page 2 of 3 < 1 2 3 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: 968 - A few unfinished parts (http://www.chiefdelphi.com/forums/showthread.php?t=52483)

Dan Richardson 22-01-2007 09:31
Re: pic: 968 - A few unfinished parts
 
I think the little ones with the rounded edges are the shooter, they fire balls into the goal, and I think the pulley's are for bring the balls to the shooter, with polycord and maybe some of that high traction stuff IFI uses :ahh:

chaoticprout 22-01-2007 12:02
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by Stud Man Dan (Post 562409)
I think the little ones with the rounded edges are the shooter, they fire balls into the goal, and I think the pulley's are for bring the balls to the shooter, with polycord and maybe some of that high traction stuff IFI uses :ahh:
Err dude, that was last year =P

GBIT 22-01-2007 15:17
Re: pic: 968 - A few unfinished parts
 
Yah ....... this year is the one with the innertubes and the "rack".

Conor Ryan 22-01-2007 16:29
Re: pic: 968 - A few unfinished parts
 
Parts of a pulley system that will manipulate your tubes?

Jeremiah H 22-01-2007 16:34
Re: pic: 968 - A few unfinished parts
 
Half of those look an awful lot like our hubs for the KoP AndyMark wheels, and the other half look like pulleys, though they seem small for that application.
Whatever they are, they sure are shiny.

Ryan Dognaux 22-01-2007 16:37
Re: pic: 968 - A few unfinished parts
 
Clearly they're just a bunch of spinning tops that 968 is giving away at competition.

Travis Covington 22-01-2007 16:38
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by Holtzman (Post 562407)
My money's on Drive Sprockets for #25 chain. The double ones are for the center wheel, and the single ones are for the front and back wheels.
We have a winner! Smart man.

Joel J 22-01-2007 16:42
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by Travis Covington (Post 562661)
We have a winner! Smart man.
Is that right?!?

How many teams are involved in this collaboration? Three?

Madison 22-01-2007 16:47
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by Joel J. (Post 562664)
Is that right?!?

How many teams are involved in this collaboration? Three?
Two -- just the same as last season. There're enough parts for two competition robots and two practice robots.

Travis Covington 22-01-2007 16:54
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by M. Krass (Post 562670)
Two -- just the same as last season. There're enough parts for two competition robots and two practice robots.
+ 2 demo gearboxes + spares. ;)

Stay tuned for the gearboxes and drivetrain. All I can tell you is that the only steel you will find is in the bearings, chain, and hardware. Oh, and very little 6061 aluminum was used.

Madison 22-01-2007 17:00
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by Travis Covington (Post 562675)
+ 2 demo gearboxes + spares. ;)

Stay tuned for the gearboxes and drivetrain. All I can tell you is that the only steel you will find is in the bearings, chain, and hardware. Oh, and very little 6061 aluminum was used.
I finally got everyone on my team to stop telling me we ought to have a drivetrain just like 254/968. If they start in on nagging me about practice robots and demo gearboxes, we're going to have to have a talk :)

Rafi Ahmed 22-01-2007 17:22
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by Travis Covington (Post 562675)
+ 2 demo gearboxes + spares. ;)

Stay tuned for the gearboxes and drivetrain. All I can tell you is that the only steel you will find is in the bearings, chain, and hardware. Oh, and very little 6061 aluminum was used.
Wow how light is your drivetrain going to be. the 2005 254/60/22 drivebase w/ electrinics was about 55. How much is yours?

Cory 22-01-2007 19:25
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by raf4far (Post 562707)
Wow how light is your drivetrain going to be. the 2005 254/60/22 drivebase w/ electrinics was about 55. How much is yours?
With electronics, not entirely sure. Especially with the heavy fuse panel and the DIN rail/block assembly.

Without electronics, ~25 lbs

AdamHeard 23-01-2007 01:35
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by Cory (Post 562785)
With electronics, not entirely sure. Especially with the heavy fuse panel and the DIN rail/block assembly.

Without electronics, ~25 lbs
I think we need to give you guys a weight handicap this year then...


Half my team was scared when they found out you guys were coming to L.A.... but, you may see some rather familiar things on our robot....

zkaratekid 23-01-2007 01:47
Re: pic: 968 - A few unfinished parts
 
Quote:
Originally Posted by Travis Covington (Post 562675)
+ 2 demo gearboxes + spares. ;)

Stay tuned for the gearboxes and drivetrain. All I can tell you is that the only steel you will find is in the bearings, chain, and hardware. Oh, and very little 6061 aluminum was used.
hmmm i m going with they used lexan for sideplates for the gearboxes and who knows maybe some carbon fiber for the chassi


All times are GMT -5. The time now is 09:13.
Page 2 of 3 < 1 2 3 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi