Chief Delphi - Has anyone keyed IFI wheels instead of using the bearings?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Has anyone keyed IFI wheels instead of using the bearings? (http://www.chiefdelphi.com/forums/showthread.php?t=52595)

Dasistmeinmoped

23-01-2007 19:38

Has anyone keyed IFI wheels instead of using the bearings?

I need to find a simple way to key the ifi wheels to the drive shaft.
any insight(words, pictures, inventor files) would be much appreciated

-matt

Kims Robot

23-01-2007 20:00

Re: Has anyone keyed IFI wheels instead of using the bearings?

We used the AM hubs to key our IFI wheels to an axle...

http://andymark.biz/am-0077.html

Dillon Compton

23-01-2007 23:36

Re: Has anyone keyed IFI wheels instead of using the bearings?

The AM universal hubs linked above have an identical bolt-hole pattern to the one on the IFI traction wheels that is typically used for a sprocket. They are also really, really light...

-Dillon Compton

Kevin Sevcik

24-01-2007 00:03

Re: Has anyone keyed IFI wheels instead of using the bearings?

You other option being to lathe and broach something similar to the AM one, but use the bolt holes for the bearing retainers instead of the ones for the sprockets.

All times are GMT -5. The time now is 13:15.