Chief Delphi
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: 968 - A few finished parts! (http://www.chiefdelphi.com/forums/showthread.php?t=52632)

Travis Covington 23-01-2007 23:56
pic: 968 - A few finished parts!
 

Cody Carey 23-01-2007 23:57
Re: pic: 968 - A few finished parts!
 
Axles for cantilevered wheels?

Lil' Lavery 23-01-2007 23:59
Re: pic: 968 - A few finished parts!
 
Live, hex, drive axles for cantilevered wheels.
Or batons :rolleyes:

Travis Covington 24-01-2007 00:05
Re: pic: 968 - A few finished parts!
 
I knew this one was too easy!

No one has figured out the black material yet, though...

Jeff K. 24-01-2007 00:06
Re: pic: 968 - A few finished parts!
 
Quote:
Originally Posted by Travis Covington (Post 563954)
No one has figured out the black material yet, though...


Black lexan or abs for electronics?

Gabe 24-01-2007 00:23
Re: pic: 968 - A few finished parts!
 
No delete option.

Travis Covington 24-01-2007 00:27
Re: pic: 968 - A few finished parts!
 
Check the other thread, too... it is none of the above. Others mentioned abs and lexan already, sorry Jeff.

Gabe 24-01-2007 00:32
Re: pic: 968 - A few finished parts!
 
Carbon-fiber reinforced nylon. Or maybe just carbon fiber or just nylon.

chaoticprout 24-01-2007 00:47
Re: pic: 968 - A few finished parts!
 
fiberglass is my guess.

Jon Jack 24-01-2007 00:50
Re: pic: 968 - A few finished parts!
 
Quote:
Originally Posted by Travis Covington (Post 563954)
I knew this one was too easy!

No one has figured out the black material yet, though...
Side plates for the transmission?

Jonathan Norris 24-01-2007 00:57
Re: pic: 968 - A few finished parts!
 
CARBON FIBER!!! maybe... :p

Travis Covington 24-01-2007 01:00
Re: pic: 968 - A few finished parts!
 
Quote:
Originally Posted by jjack (Post 563977)
Side plates for the transmission?
Yes! However, this is just the raw material... what material is it???

CraigHickman 24-01-2007 01:01
Re: pic: 968 - A few finished parts!
 
My guess on the black material is powder coated metal for your ramp. Either that or you guys got a new cart.

Kudos on the Shmexy parts, as always.

Holtzman 24-01-2007 01:17
Re: pic: 968 - A few finished parts!
 
Aluminum/Thermoplastic Composite


3 for 3?

Travis Covington 24-01-2007 01:17
Re: pic: 968 - A few finished parts!
 
Quote:
Originally Posted by Holtzman (Post 563990)
Aluminum/Thermoplastic Composite


3 for 3?
Sorry ;)


All times are GMT -5. The time now is 15:33.
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi