Power Distrubution Block
 

has anyone made a drawing or found one, or the new power distrubution block. it would really be appriciated if someone could link me to a site or send me a file.

thank you.

Re: Power Distrubution Block
 

hey i dont have a drawing but i know the general config of it...so u have a rail with a cross section that looks like this.... --___-- and you have the power distribution blocks (grey black and red) first a gray one goes on then four reds, then another grey then black ones then final gray


so it looks like...
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
__________________________________ (<= RAIL)

Re: Power Distrubution Block
 

try this, it's a pdf

http://literature.rockwellautomation...s001_-en-p.pdf

Re: Power Distrubution Block
 

I think he meant an Inventor file...

I don't think it's in the Virtual KOP, and it isn't in the FIRST CAD Library. We might just model it ourselves anyway.

Re: Power Distrubution Block
 

201 is currently working on an inventor version of it.... probably going to post sometime in the next week... if you have an Email address I can email directly to you!

Re: Power Distrubution Block
 

when do u think youll have the power distribution block ready like you we really need one. when you have it finished could you please send the inventor file to team549@hotmail.com

Re: Power Distrubution Block
 

it would be great if you could email it to me.

wadidievrdo2u@gmail.com

thanks again.

Re: Power Distrubution Block
 

if you could also email that to fighterpirate16@hotmail.com, that would be amazing!

Re: Power Distrubution Block
 

Could you also send one to me too, Pnakovich89@aol.com, Thanks.

Re: Power Distrubution Block
 

I am also interested in a CAD of the block.
babyzeretul@gmail.com

Re: Power Distrubution Block
 

Yeah if u guys get the new block done in inventor that would be great m.s.lowe@hotmail.com
Thanks

Re: Power Distrubution Block
 

1712 probably won't model it because it's on the robot and it's too late to take it off.. :(

Re: Power Distrubution Block
 

401 is interested in a CAD/Inventor drawing of the block.
geeknerd99@gmail.com

Re: Power Distrubution Block
 

come on guys, that block is not hard to make. i had my new kids with inventor make that block and it came out pretty.

Re: Power Distrubution Block
 

Well since everyone else thinks its a good idea, I'd like one too, please. My email address is sbcocd04@yahoo.com

Thanks

Re: Power Distrubution Block
 

here is what i have made so far

http://img181.imageshack.us/my.php?image=panelop7.png

Re: Power Distrubution Block
 

its a good start but its missing all the patterns and stuff, could you possably email me a zip format of all the parts and the assembly file at

wadidievrdo2u@gmail.com

thank you

Re: Power Distrubution Block
 

its not the difficulty thats the issue. its the time and the fact that its being used. do you think you could send it to me? this is our rookie year and we're running really low on time! fighterpirate16@hotmail.com thanks!

Re: Power Distrubution Block
 

is it possible to send me a copy of all the parts and the assembly please, I think the drawing looks really good, Pnakovich89@aol.com, Thanks.

Re: Power Distrubution Block
 

im going to jump on the bandwagon and have you email it to me to if its not a problem... fluffy.fro @ gmail.com
thanks in advance

Re: Power Distrubution Block
 

This is my first post, so I hope I uploaded the zip file properly. I modeled all the individual parts of the distribution block then created an assembly. I hope this helps you.