Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Inventor (http://www.chiefdelphi.com/forums/forumdisplay.php?f=57)
-   -   Power Distrubution Block (http://www.chiefdelphi.com/forums/showthread.php?t=52651)

Phil Ross 24-01-2007 12:31

Power Distrubution Block
 
has anyone made a drawing or found one, or the new power distrubution block. it would really be appriciated if someone could link me to a site or send me a file.

thank you.

normanthefatcat 24-01-2007 12:39

Re: Power Distrubution Block
 
hey i dont have a drawing but i know the general config of it...so u have a rail with a cross section that looks like this.... --___-- and you have the power distribution blocks (grey black and red) first a gray one goes on then four reds, then another grey then black ones then final gray


so it looks like...
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
__________________________________ (<= RAIL)

MrForbes 24-01-2007 12:42

Re: Power Distrubution Block
 
try this, it's a pdf

http://literature.rockwellautomation...s001_-en-p.pdf

Dan Zollman 25-01-2007 19:58

Re: Power Distrubution Block
 
I think he meant an Inventor file...

I don't think it's in the Virtual KOP, and it isn't in the FIRST CAD Library. We might just model it ourselves anyway.

johnnymath360 25-01-2007 20:21

Re: Power Distrubution Block
 
201 is currently working on an inventor version of it.... probably going to post sometime in the next week... if you have an Email address I can email directly to you!

DDAwg3 27-01-2007 10:44

Re: Power Distrubution Block
 
when do u think youll have the power distribution block ready like you we really need one. when you have it finished could you please send the inventor file to team549@hotmail.com

Phil Ross 29-01-2007 15:03

Re: Power Distrubution Block
 
it would be great if you could email it to me.

wadidievrdo2u@gmail.com

thanks again.

Stephi Rae 05-02-2007 21:29

Re: Power Distrubution Block
 
if you could also email that to fighterpirate16@hotmail.com, that would be amazing!

Pnakovich 06-02-2007 14:41

Re: Power Distrubution Block
 
Could you also send one to me too, Pnakovich89@aol.com, Thanks.

babyzeretul 06-02-2007 23:09

Re: Power Distrubution Block
 
I am also interested in a CAD of the block.
babyzeretul@gmail.com

Phoenixseeker 06-02-2007 23:35

Re: Power Distrubution Block
 
Yeah if u guys get the new block done in inventor that would be great m.s.lowe@hotmail.com
Thanks

Dan Zollman 06-02-2007 23:54

Re: Power Distrubution Block
 
1712 probably won't model it because it's on the robot and it's too late to take it off.. :(

geeknerd99 11-02-2007 14:42

Re: Power Distrubution Block
 
401 is interested in a CAD/Inventor drawing of the block.
geeknerd99@gmail.com

Michael Leicht 11-02-2007 16:02

Re: Power Distrubution Block
 
come on guys, that block is not hard to make. i had my new kids with inventor make that block and it came out pretty.

Emperorc 11-02-2007 21:34

Re: Power Distrubution Block
 
Well since everyone else thinks its a good idea, I'd like one too, please. My email address is sbcocd04@yahoo.com

Thanks


All times are GMT -5. The time now is 18:48.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi