Chief Delphi - Second controller

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)

- - Second controller (http://www.chiefdelphi.com/forums/showthread.php?t=52679)

Barry Lazzer

24-01-2007 19:59

Second controller

The Operator Interface recognizes the presence of two controllers connected to Ports 1 and 2, but the Robot Controller is not recognizing any signal from the second controller. We have used only the default code. Any suggestions? Thanks.

EHaskins

24-01-2007 20:33

Re: Second controller

Can you post the code you are using to read the joysticks?

Mike	24-01-2007 22:26

Re: Second controller

Are the controllers connected to p1 and p2? Are your motors connected to pwm01 and pwm02?

Have you tried switching your joysticks? If it works after you've switched them, you have a bad joystick.

Barry Lazzer

25-01-2007 17:51

Re: Second controller

The controller just started working. We are not sure why.

All times are GMT -5. The time now is 20:28.