Chief Delphi - Buying steel #25 sprockets

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Buying steel #25 sprockets (http://www.chiefdelphi.com/forums/showthread.php?t=52831)

AdamHeard

26-01-2007 19:23

Buying steel #25 sprockets

I'm looking for steel, flat, #25 pitch sprockets in 48 and 70/72 tooth.

Mcmaster only has these with hubs. I need them to be flat so because they will be welded onto a tube. We can buy the hubed ones and machine them off, rebore them and try to find a way to weld the hardened steel, but I would rather just buy the right thing in the first place...

so... where should I look?

sanddrag

26-01-2007 19:30

Re: Buying steel #25 sprockets

SDP-SI has them in carbon steel.

Kevin Sevcik

26-01-2007 21:20

Re: Buying steel #25 sprockets

That's http://www.sdp-si.com just in case Google is suffering from amnesia.

Kirk	27-01-2007 17:33

Re: Buying steel #25 sprockets

Check out Motion Industries.

Part# 25A40 pitch (A)hubless/(B)hubed number of teeth

Martin's Sprocket Catalog

Check out page 16.

All times are GMT -5. The time now is 13:18.