Chief Delphi - Pressure Switch Wiring

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Pressure Switch Wiring (http://www.chiefdelphi.com/forums/showthread.php?t=52863)

idahorobot

27-01-2007 11:15

Pressure Switch Wiring

I am not sure how to wire in the pressure switch for the pneumatics. The switch has two terminals the PWM digital has three. Do I use just the ground and positive?

Thank You

jgannon

27-01-2007 11:18

Re: Pressure Switch Wiring

You should connect the black wire to the C terminal, and the white wire to the NC terminal. The red wire is not used for hooking up switches.

EDIT: There is more info on page 9 of this document:
http://www.ifirobotics.com/docs/rc-r...-6-13-2006.pdf

Quote:

Wire switches between the desired digital input signal pin and a ground pin.

All times are GMT -5. The time now is 11:40.