pic: 166 CIM Support Bracket on 56mm transmissions
 

Re: pic: 166 CIM Support Bracket on 56mm transmissions
 

This is a marketable product. I'd buy two of those, if you sold them cheap enough.

Re: pic: 166 CIM Support Bracket on 56mm transmissions
 

Thats how we are supporting our CIMs. Don't you just love hose clamps:yikes:

Re: pic: 166 CIM Support Bracket on 56mm transmissions
 

Now thats pretty slick. It would be nice to have something like that in the KOP. We are using the two-motor adapter, so we'd have to modify something like that. we just put two blocks of alumninum under the mounting plate that came in the KOP and plan to connect the two transmissions together with L brackets on top.

Re: pic: 166 CIM Support Bracket on 56mm transmissions
 

We are doing something similar just not as pretty.

Re: pic: 166 CIM Support Bracket on 56mm transmissions
 

I'll see about getting drawings to anyone who wants them.

It doesn't take much effort to do this. You really only need a drill press and a bandsaw to do this. We did it with a CNC merely because we have the capability.

I'm not exactly sure how you'd do the slot without a CNC, though.