Chief Delphi - Trouble with the treads in the brass fittings?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Trouble with the treads in the brass fittings? (http://www.chiefdelphi.com/forums/showthread.php?t=52955)

CalTeach

28-01-2007 15:03

Trouble with the treads in the brass fittings?

Anyone else having troubles with the brass fittings being too tight for the cyliners? :eek:

Gabe	28-01-2007 15:17

Re: Trouble with the treads in the brass fittings?

They should be tight so that air pressure does not escape. They also might be tight if you use too little or too much Teflon tape.

Andy Brockway

31-01-2007 07:57

Re: Trouble with the treads in the brass fittings?

The threads are tapered. They will not screw all the way down to the cylinder.

All times are GMT -5. The time now is 01:06.