pic: Team 294 Teaser #2
 

Re: pic: Team 294 Teaser #2
 

Looks like the A-frame to support the pivot point for a ramp...

Re: pic: Team 294 Teaser #2
 

Looks to me like the mount/shoulder joint of an arm.

Re: pic: Team 294 Teaser #2
 

Is the whole assembly one big weldment? Or does the A-Frame remove from the lower frame? Are those front and rear pieces to mount the siderail?

Oh, if we are guessing... this is their version of the 2004/2005 254/60/22 robot frame. The things in the corners are siderail/ramp mounts. Not sure about the second part. ;)

Re: pic: Team 294 Teaser #2
 

This looks like the 60/254 arm joint from 2004. I heard 294 and 60 were collaborating this year. Surprise?

Re: pic: Team 294 Teaser #2
 

Did Daniel tell you that...?

We have communicated and they have been very helpful, but it is nowhere near the level of collaberation between 60/254 (04) and 968/254. It's more like a steady flow of help and advice.

Re: pic: Team 294 Teaser #2
 

It sounds like I was given some bad information. Sorry for any confusion this may have caused.

Re: pic: Team 294 Teaser #2
 

This is nearly done, we will post some pictures of it tomorrow.