Chief Delphi - Gas Springs Legal?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - Gas Springs Legal? (http://www.chiefdelphi.com/forums/showthread.php?t=53014)

DanDon

30-01-2007 23:19

Re: Gas Springs Legal?

Does anyone have any recommendations on how to lock the springs in the closed position and then release them?

MrForbes

30-01-2007 23:28

Re: Gas Springs Legal?

1 Attachment(s)

See if you can put one of the 3/4" bore, 1" stroke Bimba pneumatic cylinders on the mechanism in such a way that it's shaft goes thru a hole in the part that has to stay still, and a hole thru the part that moves. When the spring needs to be released, apply air pressure to the cylinder to retract the shaft from the holes.

here's a really bad sketch that you might possibly be able to understand...if not let me know and I'll try to improve it!

JoeXIII'007

30-01-2007 23:47

Re: Gas Springs Legal?

Quote:

Originally Posted by GMKlenklen (Post 568468)

what are you useing the gas springs for? i'ts ok if you can't tell.

:D

uhhh... yeah... I think I'll go with option 2 on that one, and that is not tell... :p

other than that, thank you guys for some answers to this little conundrum, much appreciated

-Joe

All times are GMT -5. The time now is 03:25.

Page 2 of 2

Show 100 post(s) from this thread on one page