Radio problem
 

We have been running our robot with a Tether and hooked up our radios today and they bot stay on standby is there something we need to do to make one transmit and one receive

Re: Radio problem
 

Make sure you have the one labeled robot controller on the robot and the one labeled operator on the operator board.

Re: Radio problem
 

Do not change your team number from the default until you have it tethered. And if your changing the channel your team number needs to be above 2048 if i remember right. Sometimes i have found you have to dis-connect the robot radio-modem while your tethered and then reconnect it, and it majically starts working.

But i would keep it on channel 40 and just change the team number.

Also check for bad cables.

Other than that i am not sure.