Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   Green Light For Vision System Angle & Distance (http://www.chiefdelphi.com/forums/showthread.php?t=53360)

StorminNormin1 03-02-2007 12:04

Green Light For Vision System Angle & Distance
 
We cannot find what angle the green light for the vision system is for a mock up field rack. Also, how far does this hang over the edge, how long is the mounting piece? Thank You!
2181 Blaine, MN :yikes:

Jay H 237 04-02-2007 14:32

Re: Green Light For Vision System Angle & Distance
 
Your question would get much better exposure and support in the Technical Discussion subforum.

This subforum is for any issues or questions on the forum itself.

You do get a cookie though for having a clear and to the point thread title.:)

dlavery 04-02-2007 15:47

Re: Green Light For Vision System Angle & Distance
 
The answer can be found in the Official FIRST Field Drawings. In particular, check the drawing labeled "Field Rack Fabrication(2)", part #1. It shows the cut angle for the light support, and the length of the offset from the center of the Rack to the light mounting position.

-dave


All times are GMT -5. The time now is 13:22.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi