Chief Delphi - Coupler for Denso Motor

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Coupler for Denso Motor (http://www.chiefdelphi.com/forums/showthread.php?t=53380)

nlknauss

03-02-2007 15:40

Coupler for Denso Motor

Does anyone know where I can get information on order the coupler for the denso motor. I found the part number (DEKA) on the 2007 KOP Checklist and don't really have any means for creating my own (= no CNC).

Thanks!

penguinsrock018

05-02-2007 17:20

Re: Coupler for Denso Motor

Last year our team found connectors that would fit the leads, crimped them to the correct 14 gauge red and black wires, and then used silicon to seal them into place so they wouldn't touch. The silicon had to dry overnight, but you don't have to buy the actual connector for the motor. :)

All times are GMT -5. The time now is 01:06.