Chief Delphi - Bumper Mounts

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Bumper Mounts (http://www.chiefdelphi.com/forums/showthread.php?t=53428)

D_Price

14-02-2008 09:58

Re: Bumper Mounts

zip ties, screws, bolts, duct tape( lol bout the last one...) but it really depends on the materials of the robot and strengths

Tristan Lall

14-02-2008 10:20

Re: Bumper Mounts

Quote:

Originally Posted by Hell918 (Post 698737)

zip ties, screws, bolts, duct tape( lol bout the last one...) but it really depends on the materials of the robot and strengths

Zip-ties? Those aren't allowed (as bumper mounts), you know.

<R08>, despite its occasional lack of specificity, describes a "bolt and fastener" system as the required means of attachment.

Caeruleus

17-02-2008 20:02

Re: Bumper Mounts

What we ended up doing was using carriage bolts with a master lock on the other end of the wood to keep it in place. Keeping the fabric and pool noodles on using staples and two angled aluminum pieces.

GBIT	17-02-2008 20:19

Re: Bumper Mounts

we drilled 1/4 inch holes in in some pieces of C channel and then droped a hinge pin in the hole attaching the C to the C of the kitbot..... it that enough of a bot and nut fasener cause it is solid.... if not were just gonna bring some 1/4 inch bolts with us

All times are GMT -5. The time now is 00:04.

Page 2 of 2

Show 100 post(s) from this thread on one page