pic: Our control board...
 

Re: pic: Our control board...
 

This is a very nice sleek control board you guys! great job!. Our team decided to go with a small box which holds the OI, and a USB port on the side for the controllers.

Are those buttons on the left hand side for..

Pickup
Unload

1st Goal
2nd Goal
3rd Goal

?

--Daniel

Re: pic: Our control board...
 

That's right! We already have 12 functions on the joystick, but we added seven additional buttons to "macro functions", like you said... And our joystick has z- axis rotation also!
Lol, and it was only $ 30 =)

Re: pic: Our control board...
 

Is on of the buttons for pick-up off the floor?

Nice controller by the way

Re: pic: Our control board...
 

Careful with your location of the competition port. In Philadelphia in 2006, the competition port cable didn't reach our OI from all the driver's stations. We asked if we could simply use a DB-15 cable to extend theirs, but we were told the competition cable had to plug directly into the OI. It looks like with your controls you are patching it in like we wanted to do. You may run into trouble with this plan.

Re: pic: Our control board...
 

Very Pretty.

I like how the color scheme of the joystick was matched by the rest of the components.

Re: pic: Our control board...
 

thanks, but our port of competition is accessible . We have placed a automotive film over the acrylic and we made a cut in the film so it will let us to see the conector DB-15 =)
thanks

Re: pic: Our control board...
 

Re: pic: Our control board...
 

thanks!

Re: pic: Our control board...
 

Only 30 dollars!! where? can you give me a link to where it is at? and you said it had how many functions? Did you guys customize the joystick or leave it as it came?

Re: pic: Our control board...
 

Lol, it's here in Brazil, and these 30 dollars are a conversion- it was 65 bucks in our currency ^^