Chief Delphi - Question about wiring digital switches.

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Question about wiring digital switches. (http://www.chiefdelphi.com/forums/showthread.php?t=53509)

DemonYawgmoth

05-02-2007 16:46

Question about wiring digital switches.

We need to wire up some digital switches, and we did this last year, but they broke between seasons and we took them off, and I don't quite remember how to wire them up. I know I need to wire them between the ground and another pin, but I'm not sure of which one it is. Any help on the matter would be greatly appreciated.

Mark McLeod

05-02-2007 16:52

Re: Question about wiring digital switches.

Wire them between ground and signal.
Leave off the center power pin.

robbrad

08-02-2007 16:36

Re: Question about wiring digital switches.

Sometimes a pull-up resistor is required to keep from getting false, floating, data.

Alan Anderson

08-02-2007 17:57

Re: Question about wiring digital switches.

Quote:

Originally Posted by robbrad (Post 574495)

Sometimes a pull-up resistor is required to keep from getting false, floating, data.

All of the Robot Controller's digital pins have such a pull-up resistor built in.

All times are GMT -5. The time now is 11:40.