Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Team 617 Robot Remp (Inventor) (http://www.chiefdelphi.com/forums/showthread.php?t=53591)

rohit 07-02-2007 17:54
Re: pic: Team 617 Robot Remp (Inventor)
 
The robot is about 8 pounds overweight. We are doing a lot to take as much weight as possible.

Alex Cormier 07-02-2007 17:58
Re: pic: Team 617 Robot Remp (Inventor)
 
Quote:
Originally Posted by rohit (Post 573829)
The robot is about 8 pounds overweight. We are doing a lot to take as much weight as possible.
how about the middle section of the platform? i see no threat of a robot goign ontop of your stuff that much that you need all that metal there to protect it.

rohit 08-02-2007 17:41
Re: pic: Team 617 Robot Remp (Inventor)
 
I made a mistake. The middle ramp is actually 24 inches by 37.625 inches.

So, the entire platform section folded is 94 inches by 37.625 inches

All the ramps together will be 35 inches by 94 inches. We dont have any part for the middle ramp yet

So, the entire robot unfolded will be 72.625 inches by 94 inches.

We are thinking of using rat traps to open up the ramps. Not sure yet

bubbablahmon 14-02-2007 10:54
Re: pic: Team 617 Robot Remp (Inventor)
 
we are using .032 3003 aluminum w/ aluminum hinges, total it weighs about 40 lbs


All times are GMT -5. The time now is 08:41.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi