Chief Delphi - PWMs not outputting in Autonomous

Quote:

Originally Posted by gnirts (Post 574626)

If they read 254 on the Dashboard then I would hazard that it is an electrical problem, not strictly software. Did you use this Dashboard, plugged into your OI, to test?

On last possible test I can think of would be to try this year's FRC plugged into some of the Victors on last year's 'bot. I am assuming at this point that everything else about autonomous work? (eg. analog inputs, digital in/outputs, etc.)

If you happen to be in charge of electrical as well, I'm sorry, but I can't really tell you how to proceed from here, other than maybe trying this year's speed controllers on last year's bot.

Good luck again (it's starting to sound like you need it),
Robinson

Well, I don't know much about the electrical side, either, so you're not alone. :p I'll have to ask the electrical team to look at it. Thanks for your advice, at least it's narrowed down the problem. If it actually isn't the problem, then (I'm going to regret this) I may have to drop the autonomous mode (which would not be good...). Thanks, anyway.