Chief Delphi - Globe Motor Wiring

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Motors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=52)

- - Globe Motor Wiring (http://www.chiefdelphi.com/forums/showthread.php?t=53712)

almsfan21

08-02-2007 17:10

Globe Motor Wiring

How is the globe motor supposed to be wired? We cannot find compatible "clips" that match the motor. Do we need to buy some, or were they supposed to be in the KOP?

Tristan Lall

08-02-2007 17:21

Re: Globe Motor Wiring

You can strip the wires and add your own connectors (see <R38>). A good crimp/solder joint is recommended. Remember to insulate whatever remains.

Greg Needel

08-02-2007 17:37

Re: Globe Motor Wiring

on a similar note, is the globe motor allowed to be run off of a spike this year?

Tristan Lall

08-02-2007 17:51

Re: Globe Motor Wiring

Yes, it's allowed to be used with a Spike. Spikes require that there be a 20 A breaker in the circuit, and 20 A breakers require that the wire be 18 AWG or larger.

The only motors that you need to run from Victors are the Johnson F-P (9012) and both flavours of CIM.

All times are GMT -5. The time now is 05:45.