CMUCam Questions
 

HI EVERYBODY !!!!

I AM WORKING WITH THE RC OF 2005.

WILL THE CAMERA WORK WITH IT???

and another question I have downloaded the Version 2.1 of the "bells and whistles" to the RC and in THE IFI LOADER THE "COM1 TERMINAL WINDOW (baud rate = 115200)"
is empty and nothing happened.

what is the problem ???

plz help me!!!
;)

Re: I HAVE SOME QUESTIONS
 

Yes, the camera works fine with the 2005 Robot Controller.

If you're getting absolutely nothing in the terminal window after connecting to the program port of the RC, perhaps the program is not running. The master processor doesn't let the user processor start until communication has been established between the RC and the OI. Do you have them tethered or connected by the radio modems?

Re: I HAVE SOME QUESTIONS
 

I haven't tethered or connected by the radio modems

Re: I HAVE SOME QUESTIONS
 

IS IT POSSIBLE TO TRACK THE GREEN LIGHT WITHOUT USING THE OI???

Re: I HAVE SOME QUESTIONS
 

Well, there's your problem. You must have the RC and OI connected and talking to each other in order for the program to run.

Re: I HAVE SOME QUESTIONS
 

IS IT POSSIBLE TO TRACK THE GREEN LIGHT WITHOUT USING THE OI???

Re: I HAVE SOME QUESTIONS
 

Set your team number to 0000. This will run autonomous mode ALL OF THE TIME. So, write your test code in the autonomous function.

By the way, the shift key is your friend. Please don't use all caps.

a question
 

HI EVERYBODY!

do I need to calibrate my camera if I am using the kevin's code??

Re: CMUCam Questions
 

RDD,
No, Kevin's code comes with pre-calibrated values to read the green light. If you cannot see the green light, you have another problem to solve, first.