Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)
-   -   USB Chicklet Power (http://www.chiefdelphi.com/forums/showthread.php?t=53848)

Smoking_Gun 10-02-2007 15:10

USB Chicklet Power
 
How are you going to power up the USB Chicklet in the competition?
Please specify the exact type of battery.

10x,
Tal

Mike Copioli 10-02-2007 22:36

Re: USB Chicklet Power
 
Quote:

Originally Posted by Smoking_Gun (Post 575514)
How are you going to power up the USB Chicklet in the competition?
Please specify the exact type of battery.

10x,
Tal


A standard 7.2 volt back up battery is all that is required.

Smoking_Gun 11-02-2007 09:36

Re: USB Chicklet Power
 
Quote:

Originally Posted by Mike Copioli (Post 575779)
A standard 7.2 volt back up battery is all that is required.

We have only one that we intend to use with the camera...

Any other suggestions?

oddjob 11-02-2007 09:53

Re: USB Chicklet Power
 
Buy another 7.2V nicad battery. It's good to have a few spares anyway.

Syncopation 21-02-2007 09:40

Re: USB Chicklet Power
 
FIRST says that the chicklet must be powered by "a 7.2V battery similar to the back-up battery." (see <R83>.) Sorry to burst your bubble, Smoking_Gun. It is possible to run it off the same power from the AC adapter (that goes to the OI's 2.5mm DC jack), but we haven't done any long-term tests. Does anyone know if the voltages match up? Any possible damage to the chicklet if we do this post-season?

Stvn 25-02-2007 02:06

Re: USB Chicklet Power
 
Quote:

Originally Posted by Syncopation (Post 583228)
FIRST says that the chicklet must be powered by "a 7.2V battery similar to the back-up battery." (see <R83>.) Sorry to burst your bubble, Smoking_Gun. It is possible to run it off the same power from the AC adapter (that goes to the OI's 2.5mm DC jack), but we haven't done any long-term tests. Does anyone know if the voltages match up? Any possible damage to the chicklet if we do this post-season?

I'm not electronics, but our team managed to wire the power on the OI well this year. We have a three-way switch. Middle is no power, right is power for OI and chicklets through a backup battery, and left is wall power for the OI and chicklets. Though we'll be using the backup battery for the actual competition, at other times we can plug one plug into the wall and have everything work.


All times are GMT -5. The time now is 07:37.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi