pic: 1403 Teaser
 

Re: pic: 1403 Teaser
 

This is one awesome claw design. However are you afraid of it popping the inner tube competition during competition?

Re: pic: 1403 Teaser
 

This isn't the final product. This is what the kids hand cut and fabricated in the machine shop, but we plan on re-making this to be a little more precise and clean. Enjoy.


edit//

We tested it and we haven't done any damage to any of the tubes so far. The ends of the claws are rounded so there shouldn't be any popping. We did test the gripper holding on the tube in many different orientations and everything seemed to be okay.

Re: pic: 1403 Teaser
 

Wow that looks awesome, i cant wait to see the full thing at NJ:)

Re: pic: 1403 Teaser
 

Can't see the bottom part of the claw but do you guys have the same type of piece on the other side? If yes, how easy is it to pick up the innertube from the floor?

The reason I am asking this is because, we had a similar design at the beginning of the season, then we scrapped it because it would be hard for the drivers to stand behind the driver station and line up with any tube that they can't see. But who knows, some teams do magic. =)

Re: pic: 1403 Teaser
 

The bottom piece is slightly different than the top piece. It is designed so the gripper can scoop under the tube and pick it up pretty easily. Like you said, its not easy to pick up off of the floor with the top piece design so we had to make the necessary changes to make it easier. It seems to be working well, but we still have some further testing to do.

BTW, the claw itself is only 2lbs. I am pretty sure that the whole gripper was only about 4~5 lbs.

Re: pic: 1403 Teaser
 

Sweet.

Re: pic: 1403 Teaser
 

We actually can score quite consistantly, the claw can also pull the tubes off the rack without much diffficulty. Now. all that's left is to clean up the edges and make it look purty!

1403!!

Re: pic: 1403 Teaser
 

Videos? It looks good.

Re: pic: 1403 Teaser
 

looks like a lot of weight for a mechanisim that has to manipulate such a light weight object.

Re: pic: 1403 Teaser
 

It actually isn't too heavy, but we did lighten the mechanism to be even less heavy by drilling a lot of speed holes in it.


As soon as we can.

The kids have just finished machining/prepping all of the pieces and we should be done assembling the whole thing tomorrow. As soon as we are done, we are going to get some quality time to practice with this puppy.