pic: Team 125 Teaser #3 (not so blurry)
 

Re: pic: Team 125 Teaser #3 (not so blurry)
 

I'm noticing gears sticking out above your chassis. I know in years past, the game objects have ended up in every possible place on a robot, and some impossible. Do you guys have any plans to cover the gears to stop tubes from being shredded?

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Cough wanna be 254/968 bot cough.
:p

Just kidding guys. From what you have all told me it sounds great. I wanna see it with that beastly arm on it though.;)

Re: pic: Team 125 Teaser #3 (not so blurry)
 

30 thou lexan is good for that job..

Eh, I think you'll find we have some cool ideas of our own.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

hmm 4 bar linkage upper arm, sweet. can't wait to see it all.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

2 sets of bearings doesn't always mean 4 bar. One could be for a motor/transmission input. ;)

Re: pic: Team 125 Teaser #3 (not so blurry)
 

wow...looks really great...can't wait to see you guys in boston!

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Very, very, pretty. You sure put effort in what you build. Can't wait to see it on the field!

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Does that look a little scaled down or is that just the angle?

Your arm looks nice but the fortê that grabs me is the low wheel base. How do you plan to scale a ramp?

Chris

Re: pic: Team 125 Teaser #3 (not so blurry)
 

I'm pretty sure they have the corners of their drivebase angled up, to allow getting on the ramp with ease.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Looking closely at the photo, you can see "sleighs" at the front and rear edges of the robot. I'm not sure what they're technically called, but these little slanted cuts remind me of the front of a horse-driven sleigh. When you hit something horizontally with them, they transfer the force vertically, and let you go up it.

Last year 177 implemented something similar using a hacksaw. 125's solution looks more elegant.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

It's not scaled down. The chairs behind it probably did that. Black also has the effect of looking a bit "small" from a distance. We can climb ramps up to 33 degrees, so the low wheel base is not particularly an issue.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Enjoy:)

Re: pic: Team 125 Teaser #3 (not so blurry)
 

wow. that drives very nicely. Was that you getting pushed around Henry? Great Job you guys, I hear you are going to the Suffield Scrimmage? see you in 6 days!

Re: pic: Team 125 Teaser #3 (not so blurry)
 

I'd recognize a certain person's laugh of excitement from anywhere. *Cough* Henry. Very attractive bot 125! The maneuverability of that machine is disgusting in a very good way! Great work and can't wait to see it in action with a beastly arm.;)

Re: pic: Team 125 Teaser #3 (not so blurry)
 

I spot me a Tom, and hear me a Henry (and see him getting pushed too).

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Yes, that was Henry being pushed. For reference, he weighs around 185 pounds (up to 200, depending on which scale that you ask ;) ). I'm in the background there too, but making noise isn't my strong suit (nor is that camera's audio, sorry for the sound issues).

Re: pic: Team 125 Teaser #3 (not so blurry)
 

It looks like 195's bot. How ironic!

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Im posting more vids now of some driving....


and Corey, get off ur lazy you know waht and come see it instead of sitting around for 6 days ;)

Re: pic: Team 125 Teaser #3 (not so blurry)
 

I've seen what 195 is supposed to look like. This is nothing like it.:cool:

Re: pic: Team 125 Teaser #3 (not so blurry)
 

http://video.google.com/videoplay?do...117&q=team+125

some more video of us playing with our baby

Re: pic: Team 125 Teaser #3 (not so blurry)
 

WOW...you have really big furniture....

Looks good though.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Thanks, that video was taken in the Curry Student Center at Northeastern University. The student center is the traditional proving ground for robot testing as seen in this picture from 2004. It's also the home of Wendy's, Taco Bell and Pizza Hut :yikes:

Re: pic: Team 125 Teaser #3 (not so blurry)
 

i dont see a transmission or anything...

what happens if something gets caught in your electronics/circuits?

that would suck if something metal short circuited your bot and something happened

Re: pic: Team 125 Teaser #3 (not so blurry)
 

The transmissions are built into the side plates of the drive train.
We are going to be adding shells to the robot to protect electronics, I believe.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Nice job, NUTrons........Kyle, Neil, Zack, Tom, Steve, Brandon, you all have done a great job. Looks good. I guess you are the ones that will be schooling Rosie this year!! We'll let you clmb up our back any match.....

Re: pic: Team 125 Teaser #3 (not so blurry)
 

The stability of that 6wd is amazing! What's your drop on the center wheel, 'cause I want to change ours to do THAT!

BEN

Re: pic: Team 125 Teaser #3 (not so blurry)
 

1/8"

I think the the smoothness of the drive can be attributed to three things:

A) The tread pattern of wedge top. It seems to have a lot of grip in the forward/reverse direction, but not a ton side to side.
B) We still haven't mounted our arm, so frictional force between the wheels is at a minimum. We plan on the COG being pretty low most of the time, so this shouldn't become a huge issue over time.
C) Our interior frame is ridiculously rigid. I've been told the rule of thumb with 6WD is to keep your frame from flexing around alot.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Functional and a sight for sore eyes. I like it.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Nice work on the drive base. I can see alot of my old team mates style in it. I hope we get the chance to take it on at nationals.

Re: pic: Team 125 Teaser #3 (not so blurry)
 

Where OH WHERE, could this have come from?????

i havent the slightest idea ..coughBENcough

Re: pic: Team 125 Teaser #3 (not so blurry)
 

man thats a tiny bot...does it reach all levels of the rack or does it jsut put tubes on the bottom leg?

Re: pic: Team 125 Teaser #3 (not so blurry)
 

The arm will be able to reach all levels of the rack.