Re: pic: 254/968 Powder Coated Parts
 

Are you worried about problems with the inertia of the lift moving it that far, that fast?

Re: pic: 254/968 Powder Coated Parts
 

Decoys!

They just made those for fun. The real machine is back there sitting on the bench :yikes: :D

Re: pic: 254/968 Powder Coated Parts
 

We'll see, once we actually have a robot that works ;) we plan on having preset buttons for each row, so Im sure if it's an issue we can have it slow down as it approachess the correct height,

Those are for 1868, the other team that works in our lab ;)

Re: pic: 254/968 Powder Coated Parts
 

I'm guessing they wont make it since this is taken from the poofs shop.

Re: pic: 254/968 Powder Coated Parts
 

We're making a late night run down to LA tomorrow night to swap parts.

Re: pic: 254/968 Powder Coated Parts
 

NIce how the heck did u get all the time to powder coat all of those? how many robots did u build? WOW:eek:

Re: pic: 254/968 Powder Coated Parts
 

Why was the decision made to go with such a different chassis this year, rather than previous years which seemed to work so well for you guys?

Re: pic: 254/968 Powder Coated Parts
 

Amazingly it only took the company one day to finish all of the parts. And we made one competition robot and one practice robot for each team.

Re: pic: 254/968 Powder Coated Parts
 

The red ones are for 968 the blue ones are for 254 (twin teams), there are 2 sets of them because, most likely, they have an extra to practice with while the other robot is being shipped around

Re: pic: 254/968 Powder Coated Parts
 

will 968 be at the SCRRF scrimmage?

Re: pic: 254/968 Powder Coated Parts
 

How do you mean? Other than those plugs on the side of the frame the side shields bolt into, and the 1x1 instead of 1x2 bar on the back, the frame is almost identical to last year's. The only "major" difference is we lowered the middle wheel an extra 1/16" this year.

Is it Saturday? If so, nope. We've got to broach our wheels and do some other stuff while in LA dropping off the parts that won't be done till mid saturday morning. We'll both be lucky to have it put together and running by Tuesday :-p

Re: pic: 254/968 Powder Coated Parts
 

If the robot is done by then, but I highly doubt that it will be. We will just have to wait for LA;)