Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Flag Holders On Robot (http://www.chiefdelphi.com/forums/showthread.php?t=54344)

11Mort11 17-02-2007 11:20

Flag Holders On Robot
 
In the rules it says to have a flag holder for your red or blue flag. If you are issued a yellow card do you need a seperate flag holder for the yellow flag or can you use the same flag holder?

Kendal Reed 17-02-2007 11:44

Re: Flag Holders On Robot
 
If you play well, you won't have to find out, will you?

Sorry, but I honestly don't know.

xxMORT11xx 17-02-2007 11:49

Re: Flag Holders On Robot
 
True, but if we do we dont want to get disqualified for not having another tube for the yellow flag.

Nuttyman54 17-02-2007 12:02

Re: Flag Holders On Robot
 
from the kickoff video it looked like they put the second flag in the same holder

DCA Fan 17-02-2007 12:11

Re: Flag Holders On Robot
 
The yellow flag will be put in the same holder as the red/blue flag.

Aratarin 17-02-2007 13:16

Re: Flag Holders On Robot
 
From how i thought that i understood it, i believe that both of the flags would go inside of the same holder, because that is how they show it in the kickoff video and i didn't see anything in the rules about a second flag holder in the book.... but it is possible that i had missed it. Hope this helped!

RedHeadRobotics 17-02-2007 16:35

Re: Flag Holders On Robot
 
They should fit in the same tubing, it's 1/2" wide, I can't imagine a flag that big

xxMORT11xx 18-02-2007 10:36

Re: Flag Holders On Robot
 
Thanks

Greg Marra 18-02-2007 10:40

Re: Flag Holders On Robot
 
Worth noting: the Winter War Zone scrimmage yesterday proved that flags do an excellent job of holding tubes. It's like a ring toss, where if you get a tube around the post it stays stuck on your robot for the rest of the match. :(

WernerNYK 21-02-2007 17:56

Re: Flag Holders On Robot
 
Quote:

Originally Posted by RedHeadRobotics (Post 580259)
They should fit in the same tubing, it's 1/2" wide, I can't imagine a flag that big

Actually, if they are using the same flags as last year, the poles are 1/4" in diameter. This means that two flags in the same tube is a net fit and will need to be jammed in. We put one flag in our holder (leftover from BattleCry 7), and there's no way another flag of the same size will just slide in.


All times are GMT -5. The time now is 01:07.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi