Help with process_Data_From_Local_IO()
 

HI EVERYBODy!!:rolleyes:

what is the difference if I will write the default routine in the process_Data_From_Local_IO() fuction .
Is there an advantage in using this function and how can I use it?
do I have to delete the default routine in user routines .c. ?

TNX FOR YOUR HELP
:cool:

Re: Help with process_Data_From_Local_IO()
 

OH GOD NO!
Actually, now that i think about it, i don't really know why this is bad, but i have a few guesses.
One: your robot's motors are designed to get updated at the rate they're at.
Two: If you run Default_Routine every time, you may slow down your code enough that a code error gets activated
Three: there's no great gain to this. 27.2 milliseconds is plenty fast, and likely you won't notice much of a difference (if it works at all)

Frankly, i don't know that this will hurt you. But i don't think the risks outwheigh the benefit. If you try, don't be surprised if something explodes (figuratively).

Re: Help with process_Data_From_Local_IO()
 

Leave almost all code in Process_Data_from_Master_uP() (or Default_Routine()).

Process_Data_From_Local_IO() doesn't have updated values from the operator interface, so there is not much that can be done in it unless you know what you are doing.