Chief Delphi - Wired VEX Controller

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- VEX (http://www.chiefdelphi.com/forums/forumdisplay.php?f=162)

- - Wired VEX Controller (http://www.chiefdelphi.com/forums/showthread.php?t=54643)

Zoheb N

20-02-2007 11:09

Wired VEX Controller

Does anyone know if you can buy a wired VEX controller because I am working on a project where I can not use the wireless controllers?

Thanks in advance

EHaskins

20-02-2007 11:31

Re: Wired VEX Controller

Run a cable from the tether port on the back of the radio (rubber flap below the radio crystal) to the RX1/RX2 input on the robot. You will need to find a cable, but that shouldn't be too hard.

EDIT: Check page 6.13-6.14 of the VEX inventor guide for more info.

ManicMechanic

20-02-2007 14:21

Re: Wired VEX Controller

Quote:

Originally Posted by EHaskins (Post 582397)

You will need to find a cable, but that shouldn't be too hard.

EDIT: Check page 6.13-6.14 of the VEX inventor guide for more info.

I have found 25' curly phone cords at the Dollar Tree; you might want to splurge and get a 50' + cord for about $5 in just about any store with an electronics dept.

Zoheb N

25-02-2007 13:25

Re: Wired VEX Controller

Thanks alot you guys...

This is really helpful since I have never touched a VEX kit before.

All times are GMT -5. The time now is 22:06.