pic: MOE 2007 - MOEzilla
 

Re: pic: MOE 2007 - MOEzilla
 

Whats next?

MOEFox?
Internet ExMOEr?
OpMOE?

Sorry, geek humor.

Re: pic: MOE 2007 - MOEzilla
 

MOE-zilla looks awesome, as always! I'm sure I'm not the only one who was checking your site regularly in hopes that the "soon to be released" message had gone away :). I've got a few quick question's, though...

Your grabber looks very effective and simple, but it also looks as though it puts a lot of your weight in the air - Do you foresee having to put a wheelie bar on this year's bot?

I think I can just barely make out Bane bots transmissions in your drivetrain. If I am correct, is there any reason you chose to use them this year even with their current failure rate?

And lastly, how do you guys actuate the ramps?


Looks great, thanks for the picture.

Re: pic: MOE 2007 - MOEzilla
 

Can't wait to see MOEzilla in action at FLR!!!

Re: pic: MOE 2007 - MOEzilla
 

It looks like you load and hold tubes on the side of your bot. Any reason for this? Is it harder to load than other methods?

Re: pic: MOE 2007 - MOEzilla
 

I don't want to steal the "ThMOEnder" from the team, but here's my understanding of their design... :)

The short arm is able to rotate (horizontally) on their elevator, much like their '05 tetra bot. This allows it to store within the envelope, as well as score from both the side and front of the robot. It looks to have a double pneumatic actuated grabber, where the top clamps down to grab a ringer, and the bottom swings downward to release the ringer. I can't tell if the arm pivots on those 4-bar links or not.

I like the design a lot! The ramps have some nifty guard rails on it, and I can only assume that they are planning on using the back wall to guilde the robots on the opposite side of the ramp. One of the subtle devices I spied are the wheel blocks on the angled side of the ramp. They look to be spring loaded, so that a robot can drive over them, but help to support the robot after the power is cut. Very nice! Can't wait to see some video.

BEN

Re: pic: MOE 2007 - MOEzilla
 

That looks like a really cool robot and I can't wait to see it at Philly. I have a couple questions.

Your grabber appears to turret, is this so?

Also, what material are your ramps made of?

Re: pic: MOE 2007 - MOEzilla
 

Thanks for the comments gang. It's great to see lotsa bot photos online to start examining designs and thought processes.

I can answer a few questions...

Our grabber does rotate about our vertical arm, about 180-degrees. The grabber does not pivot on it's horizontal axis. It is not that heavy - 5-6 lbs - and does not cause a problem being high in the air. No need for wheelie bars (this season, anyway).

We are not using Banebots.

Ramp Actuation - we have only run a few tests. Need to run more to determine best method.

MOEzilla loads tubes from the front. It appears to load from the side due to grabber position in the photo.

Ramp material -luan board with stiffening panels made of composite honeycomb sheets.

Can't wait to test MOEzilla in competition! See all of you headed to Rochester in two weeks. Best of luck to teams competing on Week 1!

Re: pic: MOE 2007 - MOEzilla
 

I've looked at pictures and the robot MOE has produced in the past, this one looks like it has a little bit of everything they have made all rolled into it. I have a good feeling about this robot. Great job MOE

Re: pic: MOE 2007 - MOEzilla
 

I like it a ton! The one downside: It doesn't have 6 arms like the really old mozilla did...

How quickly can you go from ground to top?

Re: pic: MOE 2007 - MOEzilla
 

Good question. I don't have an accurate answer for you since we didn't time it. It's fast. Fast enough to put a hole in our lab's ceiling tiles before we could stop it. :D

Re: pic: MOE 2007 - MOEzilla
 

I've been waiting for a long time to see this bot. My favorite time of the build season is always seeing MOE's reveal (One of these years, I'll make it down to Beach St. to see the real thing). Machine looks great, I'm pumped to see it on webcasts.

Re: pic: MOE 2007 - MOEzilla
 

You joke, but you should see the list of names we come up with every year to choose from. This year it was almost 2 pages of names in rather small print.

By the way Dan-o, It would be neat if you came down to visit from Albany, but you will not find us at Beech Street. Those building belong to DART now. We moved over to Barley Mill a few years ago.

Re: pic: MOE 2007 - MOEzilla
 

we're going to have some fun in competitions. as Mr Moe said, our deployment speed hasn't been timed yet but the capability of our arm is quite impressive. rochester should be a good proving ground and will definitely be an adventure (going that far up into new york at least, is it still cold up there btw? I need to know how to pack).

Re: pic: MOE 2007 - MOEzilla
 

Dress warmly.
It may snow.

Re: pic: MOE 2007 - MOEzilla
 

Re: pic: MOE 2007 - MOEzilla
 

Looks impressive as always MOE! We'll miss working with you this year.... Best of luck at the FLR, maybe you'll "sneak in under the radar" in Rochester;)
See you in ATL.

Re: pic: MOE 2007 - MOEzilla
 

Hey, this is Micah, formerly of 395, now of 708. Can't wait to compete against you guys with my new team in Philly. Good luck this year.

Re: pic: MOE 2007 - MOEzilla
 

Awesome looking robot. Good luck during the season.

Re: pic: MOE 2007 - MOEzilla
 

We are certainly going to miss our friends at the Pittsburgh Regional. We attended twice which makes it second on our Regional List to Philly. Its good to see more teams attending Pitt, after barely having enough for Elims last year.

I am very excited about FLR. As for "sneaking under the radar", I think we are just too bright green and loud for stealth missions. After 2 Regional SF finishes, I thought we had a good chance to come into Championship with a tuned camera (after some funny dances at Philly:D ) and surprise some people, but CD scouting is just too good these days. I couldn't even pick my own team with top 10 picks in 2 Fantasy FIRST drafts.

Re: pic: MOE 2007 - MOEzilla
 

I want some moe pictures..... looks great though....

Re: pic: MOE 2007 - MOEzilla
 

Sweet looking robot

424 grr used an arm simmilar to your design. We weren't able to control which arm segment went up first did you figure something out to fix that?
or did you just not encounter that problem?

Re: pic: MOE 2007 - MOEzilla
 

Early in build we had problems with the large white slider (in the picture between gripper stage and next stage) seizing in the bosch tubing tracks. That made the stages go up unevenly. After fixing the sizing of that slider, the stages lifted smoothly and consistently.

As Ben Piecuch pointed out, this is essentially the same lifter we used 2 years ago (right down to the window motor rotation) so we had some time to tweak the design. I don't know specifics (being a control systems guy:confused: ) but I would guess:

the sliders (possibly different for different stages),
staggering of the stages,
tensioners and
double winding (one chord pulls up and the other down)

One or more of the above has something to do with it (I just basically named every part). Stop by our pit at FLR and someone much more knowledgeable than I, would be happy to talk design with you.

Re: pic: MOE 2007 - MOEzilla
 

Uh guys.... I haven't even had training with the new game and you expect me to drive the arm?

Oh wait, the new arm gets a new driver?!?!

Looks good guys, Arm definitely was proven in 2005 to be reliable and sturdy. Best of luck and I'll see you at Philly!

Re: pic: MOE 2007 - MOEzilla
 

HELLOooo MOE from MOE:D
Great job again on the bot looks super as always good luck see ya in GA
MOE and TEAM 88 TJ2:yikes:

Re: pic: MOE 2007 - MOEzilla
 

I'm an anime fan and "Moe" has a completely different meaning to me...:D

Re: pic: MOE 2007 - MOEzilla
 

Hello MOE from Mr MOE:

It's been awhile since 88 and 365 have been in competition together. Perhaps we will be in the same division in Atlanta. Team 88 ROCKS! Love that spirit!