Programming 2004 RC
 

What do I need in order to program the 2004 Robot Controller and where do I get it?

Thanks.

Re: Programming 2004 RC
 

You can use the same compiler as the 2006/2007 RC. You can get the 2004 default code from here: http://www.ifirobotics.com/first-legacy.shtml or you can use this year's default code by following the instructions in Using_a_2005_FRC.txt included in the default code.

Re: Programming 2004 RC
 

Thanks for the help, but are you sure? I found this on the bottom of this page: http://ifirobotics.com/rc.shtml

Re: Programming 2004 RC
 

Add 2007 to that list. They all can use the same v2.40 compiler, but nothing newer.

Re: Programming 2004 RC
 

Yes. The software that comes on the CD in the KoP has MPLAB 7.20 and C18 2.40. A newer version of MPLAB will work fine (I've been using 7.50), but it's really the C18 version that matters. If you're still not convinced, remember that the 2006 is the same as the 2007, so if IFI says that something that works for 2006 also works for 2004, you can apply the transitive property to see that this year's stuff works for the 2004. Just be sure to follow Joe's instructions for getting the older default code.

Re: Programming 2004 RC
 

ya man, the MPLAB that was goven out this year (i forget which version) will work fine. i'm practicing my programming on a 2005 RC and OI, and it's all the same as the newer stuff. just make sure you follow the instructions from that .txt file mentioned above...i really got burned for not following them.

Re: Programming 2004 RC
 

if you want to compile for the 05 RC, make sure you select the 8520 from Configure->Select Device and use the 8520 lib and linker files