Chief Delphi - pic: Quixilver without ramps

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Quixilver without ramps (http://www.chiefdelphi.com/forums/showthread.php?t=57067)

Eugene Fang

20-04-2007 00:23

pic: Quixilver without ramps

Gabe	20-04-2007 00:24

Re: pic: Quixilver without ramps

With 6" inch wheels and rebar weights...

Eugene Fang

20-04-2007 20:49

Re: pic: Quixilver without ramps

Quote:

Originally Posted by Gabe (Post 620373)

With 6" inch wheels and rebar weights...

yes, exactly "rebar bot"

whytheheckme

20-04-2007 20:53

Re: pic: Quixilver without ramps

Quote:

Originally Posted by Pikat (Post 620372)

Quixilver robot with its ramps taken off.

It looks so.... Naked!

Otaku

20-04-2007 21:48

Re: pic: Quixilver without ramps

I don't even think I've seen your bot with ramps.

I love the Rebar, though.

Might I ask why you went from the 4" wheels to the 6" wheels?

natalie604

20-04-2007 22:07

Re: pic: Quixilver without ramps

the 6" wheels allowed us to drive up ramps much easier, and of course they increase our speed. =)
i believe we were going around 3fps in first gear and 10 or 11 with 4" wheels, and we had around .5" clearance off the ground but with the 6" wheels the robot got 1.5" clearance off the ground.

but we did save a little weight with the 4", and according to our driver it was a bit easier to drive.
PLUS THEY'RE SOO CUTE!!

Eugene Fang

21-04-2007 00:44

Re: pic: Quixilver without ramps

Quote:

Originally Posted by Otaku (Post 620740)

I don't even think I've seen your bot with ramps.

ramp shown here

http://www.chiefdelphi.com/media/photos/28414?

All times are GMT -5. The time now is 17:04.