pic: VEX Mecanum Concept Wheel
 

Re: pic: VEX Mecanum Concept Wheel
 

Actually, as shown that mecanum wheel is FVC legal. VexLabs sells 1/2" nylon spacers (link) and by using a file and a poorman's lathe (aka drill ;)) you can file the curve into them.

Re: pic: VEX Mecanum Concept Wheel
 

I was under the impression that if it did not come specifically in the VEX starter kit then it is not competition legal?

Re: pic: VEX Mecanum Concept Wheel
 

mostly everything from vexlabs is completely legal for competition unless it says that it is not on the website or in the rules

Re: pic: VEX Mecanum Concept Wheel
 

Well that's nice to know. Even though it's part of a spacer "set" it's still cheaper to get them through vexlabs than home depot, lowes, Ace, Target, or Walmart. They're also softer, easier to file, and get better traction than those at the places above.

Re: pic: VEX Mecanum Concept Wheel
 

:ahh: methinks you will have a really long (if not hard) time making 64 perfect rollers (2 per roller, 8 rollers per wheel, 4 wheels on the bot).

vivek

Re: pic: VEX Mecanum Concept Wheel
 

the local college by us has a CNC lathe that would be able to make 64 perfect rollers.... That would be awesome.

By hand would be much harder. Is that how you made them?

When can we expect to see a working chassis?

Re: pic: VEX Mecanum Concept Wheel
 

when i made my vex meccanum wheels those were the most time consuming part by drilling them out and to assemble them

Re: pic: VEX Mecanum Concept Wheel
 

Yes, I used a variable-speed drill and a file that has 4 different surfaces to file them down. They're not perfect, but to file 10 of them it took ~45 minutes.

To drill through the metal pieces it took 10 minutes since I came up with a way to do them all at once.

I bent the metal by hand so it's not exactly 45 degree, and the spacing on the rollers isn't exact either. It's a concept though, to show that it can be done.

Re: pic: VEX Mecanum Concept Wheel
 

Another Vex Mecanum Wheel:
http://www.chiefdelphi.com/media/photos/25957

Re: pic: VEX Mecanum Concept Wheel
 

If you have access to machine tools you can probably make a dye (or is it die?) out of steel so you can bend them all exactly 45.

Re: pic: VEX Mecanum Concept Wheel
 

Unfortunately, IFI will not break up the $8 kit that comprises of the plastic (and adjustable) lock bars. To complete a single set of wheels with this design, one would have to spend $48 for these parts alone. Before those, the price per wheel would be $14 per wheel with 8 rollers.

Re: pic: VEX Mecanum Concept Wheel
 

Why can't you just buy the same nylon spacers at your local hardware store? Would then only cost about $32... depending on how much each one costs. Some stores vary, the one I work at has them around $0.35 each... I can get them at about a dime a piece or less after discount.

Re: pic: VEX Mecanum Concept Wheel
 

Well since many people are showing their vex mecanums, I might as well show what I am up to...



The wheels are roughly the same size as the 4" wheels. Uses eight 2" lengths of vex shaft and 16 shaft collars per wheel.

I hope to have these wheels done soon.

Re: pic: VEX Mecanum Concept Wheel
 

He is referring to the "lock bars" that make the wheel spin with the axle, not the spacers.
Kit ($8):

http://www.vexlabs.com/vex-robotics-...it-parts.shtml