Chief Delphi - pic: Freud

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Freud (http://www.chiefdelphi.com/forums/showthread.php?t=57784)

Cool!. Very impressive

I dont have the slightest idea what it is...:o
Care to explain?

I'm curious as to where the control system is mounted, on the underside?

Quote:

Originally Posted by 1359th Scalawag (Post 630345)

I dont have the slightest idea what it is...:o
Care to explain?

I believe this is a very compact, low cost two wheel swerve drive.

Cautiously, I ask: why is it named Freud-- or is that one of those "if you have to ask..." type of things?

Quote:

Originally Posted by lukevanoort (Post 630349)

I'm curious as to where the control system is mounted, on the underside?

I believe this is a very compact, low cost two wheel swerve drive.

i don't think it is done as of yet, because the main wires are not in there ( wires coming from the battery). I think he is going to add a second layer with the RC

what kind of router do you have? , Alex? how did you set up your cut?

First, the shape wasn't intended but just because that is the case doesn't mean I can't have fun with the name :D . On another note there has not yet been a person who has seen it that hasn't identified it as phallic.

what is missing is two speed controllers and some type of RC. I was going to use a vex but I don't know if it can control the spike (if somebody knows it would be very helpful).

I cut every piece on the machine with one of these:
http://www.intelitek.com/products/pr...=1&pid=2&did=8
My school has had one for several years but nobody knew how to use it (even my teacher). I spent the last couple of school years teaching myself to use it and I think I have done pretty well so far. The cut was set up using a piece of plywood that was several inches too large so that I didn't need to be accurate. I hope that answers your question. I had to do a little tweaking of the battery hole because it was a little small but other than that it has been working perfectly.

Thanks for all the comments.
Alex

One of my prototypes for the controls box for next year looked a bit odd because of the amount of space on a said part of the robot i was designing it for, but that did not mean I had any perverted intention what so ever, it was just that there was a limited amount of space to design this particular piece and I used as much as I could.

Let's leave the phallic discussion for somewhere other than this site, please.

Quote:

Originally Posted by Brandon Martus (Post 630415)

Let's leave the phallic discussion for somewhere other than this site, please.

Sorry for provoking it!