![]() |
pic: 648 Cardboard Crab Steer Boat 1
|
Re: pic: 648 Cardboard Crab Steer Boat 1
Here it is... I'm extremely excited about this innovative design. I'm sure it will impress a lot of people, especially the FIRST community. :D
Okay, so any comments or suggestions? I think this may impress us on the speed also, the boat should be fairly lightweight and with the addition of a second propellor we should be able to turn some water. Unfortunately, I won't be there to oversee anymore of the build, I have work... lol. |
Re: pic: 648 Cardboard Crab Steer Boat 1
how do you know if it is buoyant enough?
|
Re: pic: 648 Cardboard Crab Steer Boat 1
Quote:
Malhon |
Re: pic: 648 Cardboard Crab Steer Boat 1
I know you can set cusom masses by just filling in the box, haven't tried it with densities however.
|
Re: pic: 648 Cardboard Crab Steer Boat 1
Very innovative! I like - I hope it works. Be sure to post pictures and videos of the real thing.
|
Re: pic: 648 Cardboard Crab Steer Boat 1
Quote:
You may also find that while this design will exhibit omni-directional drive ability, that it may also exhibit very little directional stability... the ability to track in a straight line. It is a cool looking design, but I wouldn't expect it to go fast, or in a particularly straight line. Perhaps if the tetrahedrons were replaced with streamlined "rudders" that each rotated as the pilot did.... Jason |
Re: pic: 648 Cardboard Crab Steer Boat 1
You will have a very difficult time steering this boat. If you're ever rowed a flat-bottomed inflateable dinghy in the wind, you'll know why.
It's a bit like trying to walk on ice. Powerboats use a V shape hull for tracking, and sailboats use a keel. You have a couple options to correct that. You can move the propellers so that they will pull the boat. Pushing an unstable boat is like trying to balance a shovel on your hand. Or you can change from the tetra design to hulls that have self-tracking, like a catamaran. A number of solutions - but you're going to have trouble if you don't implement one of them. |
Re: pic: 648 Cardboard Crab Steer Boat 1
Quote:
-Select "Default", or whatever is closest to cardboard. -Click "New", and type in a name for the new material ("Cardboard"). -Enter the mass properties and click Save. -You can also edit which texture the material uses by default, as well as other physical properties. -You'll have to import the Cardboard material into each part. I'm not sure how to do this with Inventor 11. -Set the part(s) to be cardboard. Hope this helps! |
Re: pic: 648 Cardboard Crab Steer Boat 1
Quote:
Heh, the "impressive speed" is well below the speed required to win a race. We have some difficulties in the past about maneuvering the left hand corners of the 200m course. Our biggest rival is mother nature... if it's windy, we might be in trouble, but if it isn't, my guess is that we'll be fine and we'll be able to control the boat fairly well. There is one thing that is for certain. When we go to turn and are carrying some speed, we'll somewhat drift around the turn. Carrying both forward and left motions. We'll also lose nearly all of that speed in the turn. |
Re: pic: 648 Cardboard Crab Steer Boat 1
One thing--when you turn the pilot, aren't you worried about turning the boat instead? It would be easy to do--and just like a helicopter without a second rotor.
|
Re: pic: 648 Cardboard Crab Steer Boat 1
Quote:
Malhon |
Re: pic: 648 Cardboard Crab Steer Boat 1
Quote:
|
Re: pic: 648 Cardboard Crab Steer Boat 1
Tsk Tsk. I don't see a lifejacket there.:rolleyes:
Interesting concept... certainly doesn't seem useful outside of still water (I believe that was already mentioned of course). |
Re: pic: 648 Cardboard Crab Steer Boat 1
Well, we tried it yesterday, and won third place in our division.... It was extremely slow, completing the course in 10 min 50 sec (just as I was ready to pass out!!) , but it took on no water and didn't even think about sinking, even with one of the biggest kids on our team Tyler driving it. I think at Galesburg it will be for display purposes only... It turned on a dime as usual, but was slow. Our "FIRST" Attempt boat from two years ago took first place again for i think the fourth time. All in all it was a very fun competition.
|
| All times are GMT -5. The time now is 22:42. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi