Chief Delphi - AndyMark transmissions at IRI

Page 4 of 4

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - AndyMark transmissions at IRI (http://www.chiefdelphi.com/forums/showthread.php?t=58215)

Madison

16-08-2007 13:43

Re: AndyMark transmissions at IRI

Quote:

Originally Posted by Andy Baker (Post 638106)

Yes... and what if those 12 tooth sprockets were offered in steel and 7075 aluminum?

We already offer the 12 tooth sprockets.

The 7075 aluminum sprockets will be new for us. We are initially putting out a 12 tooth version, but may make 14 tooth and others if the demand is high.

Andy B.

Ooh, can you make broached, 7075 Aluminum, #25 pitch sprockets next? Please?

Steel sprockets are killing our weight budget.

AdamHeard

16-08-2007 21:29

Re: AndyMark transmissions at IRI

Quote:

Originally Posted by Andy Baker (Post 638103)

Three main places that teams could reduce weight in this gearbox would be to replace the aluminum extrusion with spacers (about 0.7 lbs),

92511A085 and 92510A792 from mcmaster would get that job done real fast, and for a decent price.

All times are GMT -5. The time now is 03:48.

Page 4 of 4

Show 100 post(s) from this thread on one page