CAD model of FIRST logo needed
 

I am doing a design for a plaque that needs to have the FIRST logo incorporated into it. Does anyone have the FIRST logo CADded already? If you already have this, please send me an email or PM me.

Thanks in advance,
Andy B.

Re: CAD model of FIRST logo needed
 

Andy,

I assume that the vectorized FIRST logos available from their website won't cut it? There's not a lot that .eps files won't do, though a Baker-grade project might fall into that small group.

Re: CAD model of FIRST logo needed
 

if i had cad i would do but sorry bro

Re: CAD model of FIRST logo needed
 

I found these on the forums. Hope they help Andy!

http://www.chiefdelphi.com/forums/sh...78&postcount=3
http://www.chiefdelphi.com/forums/sh...97&postcount=5
http://www.chiefdelphi.com/forums/sh...30&postcount=4

Pavan

Re: CAD model of FIRST logo needed
 

Hey Andy, what kind of format do you need it in?
(2D sketch (AutoCAD) , 3D model (Solidworks))

I can probably come up with something if given a little bit of time, or find one that already exists.

Edit: What Pavan linked above was 2D, but can easily be converted into a 3D extrusion if you need it there Andy.

Re: CAD model of FIRST logo needed
 

Getting the shapes to interlock properly sounds like a fun challenge -- more fun than adding tubing to an assembly wherein all of the tube connectors are floating... guess which I'm doing.

Re: CAD model of FIRST logo needed
 

Thanks all... I think that I have enough now to do what I need.

Andy

Re: CAD model of FIRST logo needed
 

Hmmm... all of those previous files were of the old logo (posts from 2002, 2004, 2004). Looks like I am CAD'ding this morning. I'll post what I come up with.

AB

Re: CAD model of FIRST logo needed
 

I would suggest using a Raster Image and tracing the logo it would go a lot faster.
Hope it helps

Julie

Re: CAD model of FIRST logo needed
 

Andy,

A 3D UG/NX model of an award I designed last year was just forwarded to you via Travis--it has a fairly good likeness of the FIRST logo embossed in it. Hope it works for you, or let me know if you need it in another format (IGES, etc.)

Re: CAD model of FIRST logo needed
 

i would say his way is funner but what ever

Re: CAD model of FIRST logo needed
 

2d to 3d ext easy

Re: CAD model of FIRST logo needed
 

We had a similar problem with our team logo this year. We had lost all electronic files of it when our member who made it graduated. So I took a picture of our t-shirt from lastyear and spent two hours a day for five weeks tracing the face on AutoCAD with a polyline. Then pedit it together and hatching it. Not something I would suggest to someone who has not used such tools before. But since we are talking about the first logo, you could probably use straight lines for both the square and triangle. Hopefully this will help.