Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)
-   -   2007 Drive Train Poll (http://www.chiefdelphi.com/forums/showthread.php?t=58598)

FTtyler 31-08-2007 13:40

2007 Drive Train Poll
 
Please leave reply for other or custom drive trains!!!

Cory 31-08-2007 13:48

Re: Drive Train Poll
 
Custom 2 speed shifting transmission.

Madison 31-08-2007 13:56

Re: 2007 Drive Train Poll
 
17.36:1 single-speed gearbox using some AndyMark components set into a custom housing.

Tottanka 31-08-2007 14:06

Re: 2007 Drive Train Poll
 
Banebots, and custom made worm-gears

David Guzman 31-08-2007 14:14

Re: 2007 Drive Train Poll
 
Custom 2 speed ball bearing shifter.

IndySam 31-08-2007 14:33

Re: 2007 Drive Train Poll
 
AM shifter and AM traction and Omni wheels.

Chuck Glick 31-08-2007 14:44

Re: 2007 Drive Train Poll
 
Dawgma 1712 used The AM gearbox, a one speed running at roughly 12.5:1, same ratio as the Banebots box.

Gabe 31-08-2007 14:54

Re: 2007 Drive Train Poll
 
Custom 2 speed ball shifting transmission.

viking1902 31-08-2007 14:58

Re: 2007 Drive Train Poll
 
We used the guts from the AM Gen 2 shifters and put them into our own custom side plates.

Grant Cox 31-08-2007 15:01

Re: 2007 Drive Train Poll
 
The ThunderChickens love our 1-speed "Copioli" transmission :)

Billfred 31-08-2007 15:24

Re: 2007 Drive Train Poll
 
1618 used the AndyMark Gen2 Shifter, with the pneumatics. (We used the small and big CIMs in tandem, as we needed one small CIM for our arm.)

1293 used the BaneBots 12:1 gearboxes, directly into their tread sprockets.

Kyle Love 31-08-2007 15:28

Re: 2007 Drive Train Poll
 
The TechnoKats used altered guts from the AndyMark Gen 2 with our own side plates. The AndyMark's were adapted to use a live axle system.

AndyB 31-08-2007 16:36

Re: 2007 Drive Train Poll
 
Other

Custom designed/built worm-crab drive using 4 CIM motors.

AdamHeard 31-08-2007 17:50

Re: 2007 Drive Train Poll
 
3 motor single speed w/ a single gear reduction two 6 6" wheels.

dtengineering 31-08-2007 18:05

Re: 2007 Drive Train Poll
 
Four small CIM's each hooked up to a 12:1 BB leading to AM Mecanum Wheels.

Jason


All times are GMT -5. The time now is 17:01.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi